manualshive.com logo in svg

Panasonic KX-FPG391C, Operating Instructions Manual

Share
Download
Panasonic KX-FPG391C Operating Instructions Manual Download Page 4

2

Thank you for purchasing a Panasonic fax machine.

Things you should keep a record of

Attach your sales receipt here.

For your future reference

You can select English or French for the language.

The voice guidance, display and reports will be in the selected language. The default setting is English. 
If you want to change the setting to French, see feature #48 and #50 on page 78.

Caution:

L

Note that the images of copied or received documents will remain on the used ink film. Use discretion 
when disposing of the used ink film.

L

Do not rub or use an eraser on the printed side of recording paper, as the print may smear.

Copyright:

L

This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for 
internal use only. All other reproduction, in whole or in part, is prohibited without the written consent 
of Panasonic Communications Co., Ltd.

© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.

Date of purchase

Serial number (found on the rear of the unit)

Dealer’s name and address

Dealer’s telephone number

FPG391C-PFQX2077ZA-en.book  Page 2  Tuesday, August 31, 2004  10:12 AM

Summary of Contents for KX-FPG391C



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands