11
Setup
For fax advantage assistance, call 1-800-435-7329.
Ink film
“T” shaped gear
(blue)
Note:
●
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
8
Close the back cover securely by pushing
down on the dotted area at both ends (
).
Close the front cover securely (
).
●
The following message will be displayed
while the unit is checking that there is no
slack in the ink film.
Display:
PLEASE WAIT
2
1
1
2
Dotted area
Back cover
Front cover
Display
5
For replacement only
Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue)
Stopper
Stopper
6
Insert the blue core of the front ink film roll
into the right slot of the unit (
). Insert the
“T” shaped gear (blue) into the left slot of
the unit (
).
Insert the rear ink film roll (
).
3
2
1
2
Right
slot
Blue core
1
“T” shaped
gear (blue)
3
Left
slot
Rear ink film roll
Front ink
film roll
7
Turn the “T” shaped gear (blue) in the
direction of the arrow.
●
Make sure that the ink film is
wrapped around the blue core
at least once.
Slack
Reverse
Tight
Correct
Incorrect
Blue core
The ink film is not wrapped
around the blue core.