Panasonic KX-FM131AL Operating Instructions Manual Download

Page: 65 / 140

Sending Faxes

Fax/Copy

Note:

●

The connecting tone volume cannot be adjusted.

Connecting tone

This feature allows you to hear connecting tones, such as a fax tone, ring back tone or busy tone for several
seconds when you send a fax using the One-Touch Dial or EASY DIAL directory. This will tell you the status of
the other party’s machine.

— Fax tone:

The other party’s machine is ready for reception.

— Ring back tone: If this tone continues, the other party’s machine may not be a facsimile or may have run

out of paper. Check with the other party.

— Busy tone:

The other party’s machine is busy. Let the unit continue redialling or press

and try

again later.

This feature is set to “ON” as a pre-selected setting. If this feature is not required, you may turn it off.

STOP

Press

Display:

Press

, then

Press

to select the desired setting.

●

If this feature is not required, select “OFF”.

Press

MENU

SETUP ITEM [ ]

START/SET/COPY

MODE=ON

▼▲

START/SET/COPY

CONNECTING TONE

7 6

1.SYSTEM SET UP

MENU

START/SET/COPY

MENU

STOP

Summary of Contents for KX-FM131AL













































































































































Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands

Panasonic KX-FM131AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands