Panasonic KX-FM131AL Operating Instructions Manual Download

Page: 27 / 140

Setup

Initial

Preparation

Adding paper to the paper tray

1. Pull the tension bar forward and hold open while

removing all of the installed paper.

2. Add paper to the paper stack and straighten.

3. Fan the stack of paper.

4. Pull the tension bar forward and hold open while

inserting the paper.

Tension bar

Note:

●

Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper
used for resumes.

●

Do not use different types or thicknesses of paper in the paper tray at the same time. This may
cause a paper jam.

●

Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated,
damaged or wrinkled.

●

Avoid double-sided printing.

●

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper
may jam.

●

Do not reinsert the ejected paper into the recording paper exit.

●

Some paper only accepts print on one side. Try using the other side of paper if the print quality is
unsatisfactory.

Summary of Contents for KX-FM131AL













































































































































Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands

Panasonic KX-FM131AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands