Panasonic KX-FM131AL Operating Instructions Manual Download

Page: 103 / 140

Sorry, no more memory.
Please erase unnecessary messages.

103

From a remote touch tone telephone

Listening to recorded messages

Call your unit.

Enter the remote operation ID during the TAD/FAX
greeting playback.

●

The voice guide will tell you the number of new
recorded messages and they will be played
automatically.

●

To repeat the new recorded messages, press

●

To listen to all of the recorded messages, press

During playback

Repeating a message

Press

to play the current message.

●

If you press

within 5 seconds of the beginning of

a message, the previous message will be played.

Skipping a message

Press

Remote Operation

(KX-FP121/KX-FM131 only)

Answering

Device

3 new messages.

5 messages.

Voice guide example:

No new messages.

When there are no new recorded
messages

The voice guide will be heard.
Press

or wait for 4 seconds to listen to all of the

recorded messages.

When memory is full

The voice guide will be heard after playing the messages.
Erase some or all of the messages (p. 98).

Summary of Contents for KX-FM131AL













































































































































Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands

Panasonic KX-FM131AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands