Panasonic KX-FM131AL Operating Instructions Manual Download

Page: 76 / 140

Receiving Faxes

TEL/FAX mode

(receiving voice calls with rings and fax calls without
rings when you are near the unit)

Use this mode when you are always near the unit and want the fax machine to detect faxes without ringing.
When a call is received, the unit will work as follows. If you have an extension telephone connected, see next
page.

The unit will not ring.*

Voice call

Fax calling tone**

TEL/FAX delayed

ring count

Silent fax recognition

ring count

The unit will automatically
activate the fax function for fax
machines that do not send a fax
calling tone.

A call is
received.

The unit will ring up to
3 times.***

Answer the call.

The unit will
automatically receive
documents without
ringing.

Ring

The following message will
be played after the TEL/FAX
delayed rings.
(KX-FP121/KX-FM131 only)

Hello! To send a fax, start

transmission.
To speak with someone,
please wait.

If the call is not answered,
the following message
will be played.****
(KX-FP121/KX-FM131 only)

No one is available to

take your call right now.
Please try again later.
Thank you.

* *

* A telephone fee will be charged to the caller from this point.

** A fax calling tone is automatically generated by the sending fax machine. Some fax machines do not have

this capability.

*** While ringing, the unit will emit a different ring back tone to the calling party.

**** You can record your own greeting message (p. 94)(KX-FP121/KX-FM131 only).

Note:

●

The unit will display the following when a call is received.

Display:

●

The ringer should be on (p. 33).

INCOMING CALL

Summary of Contents for KX-FM131AL













































































































































Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands

Panasonic KX-FM131AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FM131AL

Reviews:

Related manuals for KX-FM131AL

Brands by name

Popular brands