2. Preparation
22
For assistance, please visit http://www.panasonic.com/help
2.9 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
1
{
Menu
}
i
{#}{
1
}{
0
}{
3
}
i
{
Set
}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+
”, press
{*}
.
L
To enter a space, press
{#}
.
L
To enter a hyphen, press
{
Flash
}
.
L
To erase a number, press
{
Stop
}
.
3
{
Set
}
4
Press
{
Menu
}
to exit.
To correct a mistake
Press
{
<
}
or
{
>
}
to move the cursor to the incorrect
number, and make the correction.
L
To erase all numbers, press and hold
{
Stop
}
.
2.10 Configuring the unit to
access the LAN (KX-FLM671
only)
You can print documents, scan documents, receive
faxes or send faxes using a computer connected to the
LAN. To enable these features, you need to set the IP
address, subnet mask, and default gateway in the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
2.10.1 Setting up automatically with a
DHCP server
Your situation:
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, connect the power cord.
L
The IP address, subnet mask, and default
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with. See page 23 for details.
Note:
L
You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
2.10.2 Setting up manually
Your situation:
–
When your network administrator does not manage
the network with a DHCP server.
–
When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
1
{
Menu
}
2
Press
{#}{
5
}{
0
}{
0
}
to display
“
DHCP
”
.
3
Press
{
0
}
to select
“
DISABLED
”
.
i
{
Set
}
4
Set each item.
For the IP address:
1.
Press
{
5
}{
0
}{
1
}
to display
“
IP ADDRESS
”
.
2.
{
Set
}
i
Enter the IP address of the unit.
i
{
Set
}
For the subnet mask:
1.
Press
{
5
}{
0
}{
2
}
to display
“
SUBNET MASK
”
.
{
<
}{
>
}
{
Set
}
{
Menu
}
{
Stop
}
{
Flash
}
