Panasonic KX-FLB881E, Operating Instructions Manual

Page: 22 / 104

2. Preparation
22
2.10.2 Installing Multi-Function Station on
a computer
L
Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the
[
Found New Hardware Wizard
]
dialogue box will appear. Click
[
Cancel
]
to close
it.
L
The screenshots shown in these instructions are
for Windows XP and are included for reference
only.
L
The screenshots shown in these instructions
may differ slightly from those of the actual
product.
L
Software features and appearance are subject to
change without notice.
1
Start Windows and exit all other applications.
L
For Windows 2000, Windows XP and Windows
Vista users, you must be logged in as an
administrator in order to install Multi-Function
Station.
2
Insert the supplied CD-ROM into your CD-ROM
drive.
L
If the
[
Select Language
]
dialogue box appears,
select the desired language that you want to use
with this software. Click
[
OK
]
.
L
If the installation does not start automatically:
Click
[
Start
]
. Choose
[
Run...
]
. Type “ D:\Install ”
(where “ D ” is the drive letter of your CD-ROM
drive). Click
[
OK
]
.
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3
[
Easy installation
]
L
The installation will start.
4
When the setup program starts, follow the on-screen
instructions.
L
Readiris OCR software (page 30) and Device
Monitor (page 67) will also be installed.
5
The
[
Connect Type
]
dialogue box appears.
For USB connection:
1.
[
Connect directly with a USB cable.
]
i
[
Next
]
L
The
[
Connect Device
]
dialogue box will appear.
2. Connect the unit with the USB cable (
1
), then click
[
Next
]
.
L
If the unit is connected to your computer, the
model name will be automatically detected.
L
You can change the name of the unit if necessary.
3. Click
[
Install
]
, then follow the on-screen
instructions.
L
The files will be copied to your computer.
For LAN connection:
1.
[
Connect via the Network.
]
i
[
Next
]
L
The
[
Select a Network Device
]
dialogue box
will appear.
2. Check
[
Select in the searched list
]
and select the
unit from the list.
L
If the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check
[
Direct input
]
and enter the IP
address.
3.
[
Next
]
L
You can change the name of the unit if necessary.
4. Click
[
Install
]
, then follow the on-screen
instructions.
L
The files will be copied to your computer.
To view or install the operating instructions in the
CD-ROM
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. Click
[
Operating Instructions
]
, then follow the on-
screen instructions to view or install the operating
instructions in PDF format.
L
Adobe
®
Reader
®
is required to view them.
Important notice
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
L
For Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
L
For Windows Vista users
“Would you like to install this device software?”
1
FLB881E-PFQX2796ZA-OI-en.book Page 22 Thursday, September 13, 2007 2:16 PM