10. Help
70
10.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
“
CALL SERVICE
”
L
There is something wrong with the unit. Contact our service personnel.
“
CARRIAGE ERROR
”
L
There is something wrong with the carriage sensor. Contact our service
personnel.
“
CHANGE DRUM
”
L
There is something wrong with the drum unit. Replace the drum unit and the
toner cartridge.
“
CHECK DOCUMENT
”
L
The document was not fed into the unit properly. Remove the document,
then press
{
STOP
}
to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 88)
and try again.
“
CHECK DRUM
”
L
The drum unit is not inserted properly. Re-insert it correctly (page 9).
“
CHECK PICK UP INPUT
TRAY #1
”
L
Recording paper was not fed into the unit properly. Re-insert the recording
paper (page 82).
Note:
L
“
#1
”
: Paper input tray
L
“
#2
”
: Manual input tray
“
CLOSE ADF COVER
”
L
The ADF cover is open. Close it.
“
DIRECTORY FULL
”
L
There is no space to store new items in navigator directory. Erase
unnecessary items (page 39).
“
DRUM LIFE LOW REPLACE
SOON
”
L
The drum life is near its end. Replace the drum unit as soon as possible.
“
FAX IN MEMORY
”
L
The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
90.
L
If feature #442 is set to
“
ALWAYS
”
(page 57), check the connection between
the computer and the unit.
“
KEEP COPYING
”
L
Copying has stopped due to a lack of recording paper or misfeeding of
recording paper. See the other displayed message instructions to continue
copying.
“
LOW TEMP.
”
L
The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area. While the unit cannot be operated, the received
documents are temporarily stored into the memory, and will be printed out
automatically when the unit warms up.
“
MEMORY FULL
”
L
When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L
When making a copy, the document being stored exceeded the memory
capacity of the unit. Press
{
STOP
}
to clear the message. Divide the
document into sections.
“
MODEM ERROR
”
L
There is something wrong with the unit’s modem. Contact our service
personnel.
“
NO FAX REPLY
”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
FLB881E-PFQX2796ZA-OI-en.book Page 70 Thursday, September 13, 2007 2:16 PM
Summary of Contents for KX-FLB881E
Page 103: ...103 Notes ...
Page 104: ...PFQX2796ZA CM0907CJ0 CD ...
