Panasonic KX-FLB881E Operating Instructions Manual Download Page 27

Page: 27 / 104

3. Printer

To print on labels

Use labels designed for laser printing. We recommend
the following:

Avery

5160/5161/5162/5163/5164/5165/5167/5168

XEROX

LWH100/LWH110/LWH120/LWH130/LWH140

Use the manual input tray to print labels.

Load label sheets one page at a time for printing,
print-side down.

Printed label will be stacked on the upper output
tray.

Remove each label after printing.

Do not use the following types of labels:
–

Labels that are wrinkled, damaged or separated
from the backing sheet.

–

Any sheet of labels that has spaces in it where
some of the labels have been removed.

–

Labels that do not completely cover the backing
sheet as follows.

To print on envelopes

Use envelopes designed for laser printing. We
recommend the following:
–

High quality envelopes of 90 g/m

paper,

–

Envelopes that have thin, sharply creased leading
edges,

–

Envelopes that have diagonal seams, and

–

Envelopes with a moisture content of 4% to 6% by
weight.

Use the manual input tray to print envelopes.

You can load 1 envelope of 90 g/m

paper at a

time for printing, print-side down (

Printed envelope will be stacked on the upper
output tray.

Remove each envelope after printing.

Note:

Wrinkles and waving may occur in some cases, even
if high quality envelopes are used.

Avoid printing in high humidity. High humidity may
cause the envelope to curl or seal the envelope.

Store envelopes away from moisture and humidity,
where they can lay flat and their edges will not be
bent or damaged.

Do not use envelopes with any of the following
characteristics (using these may result in paper
jams):

Irregularly shaped envelopes

Envelopes with curls, wrinkles, nicks, twists, dog-
ears or other damage

Envelopes with side seam construction

Highly textured envelopes, or envelopes with
extremely shiny surfaces

Envelopes that seal by removing a peel-off strip

Envelopes with more than one flap to be sealed

Self-adhesive envelopes

Envelopes that are baggy or not sharply creased

Embossed envelopes

Envelopes that have previously been printed on

Envelopes that include cotton and/or fibre material

Side seam

construction

Peel-off strip

Multiple flaps

Twisted

Curled

Bent-edged

FLB881E-PFQX2796ZA-OI-en.book Page 27 Thursday, September 13, 2007 2:16 PM

Summary of Contents for KX-FLB881E









































































































Search results

Summary of Contents for KX-FLB881E

Reviews:

Related manuals for KX-FLB881E

Brands by name

Popular brands

Panasonic KX-FLB881E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB881E

Reviews:

Related manuals for KX-FLB881E

Brands by name

Popular brands