87
Maintenance of the camera [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu can be performed on this page.
The "Maintenance" page has 3 tabs; the [System log] tab, the [Upgrade] tab and the [Default reset] tab.
Check the system log [System log]
Click the [System log] tab of the "Maintenance" page. (
☞
Pages 22 and 23: How to display/operate the setup
menu)
Up to 4 000 system logs can be saved on the SD memory card when the SD memory card is inserted after select-
ing "Use" for "SD memory card" on the [SD memory card] tab (
☞
Page 28).
When "Not use" is selected for "SD memory card", up to 100 system logs can be saved on the built-in memory of
the camera.
When the saved system logs have reached the maximum number, the newer logs will overwrite the older system
logs. In this case, the oldest log is the first to be overwritten.
The system logs will be displayed in group of 100 logs each.
When using the SD memory card, the logs will be saved even when the power of the camera is turned off. When
not using the SD memory card, the logs will be deleted when the power of the camera is turned off.
[Next 100 >>]
When clicking "Next 100 >>", the next 100 system logs
will be displayed.
[<< Previous 100]
When clicking "
<<
Previous 100", the previous 100 sys-
tem logs will be displayed.
[No]
The serial number of the system log will be displayed.
[Time & date]
Time and date at the error occurrence will be displayed.
Note:
• When "Off" is selected for "Time display format" on
the [Basic] tab (
☞
page 26
), time & date of logs will
be displayed in 24-hour format.
[Error description]
The descriptions about the error will be displayed.
Refer to page 91 for further information about the sys-
tem logs.
