84
How to set the schedules
Step 1
Check the check box of the desired day of the week of
"FTP image transmission schedle".
→
The selected day of the week will be validated for
the schedule.
Step 2
To designate time, click [
C
] and select the desired
"hour" and "minute".
When not designating time, check the checkbox of
"24h".
Step 3
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the
window.
Configure the schedule settings of the FTP periodic image transmission
[FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (
☞
Pages 22 and 23: How to display/operate the setup
menu)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to page 83
for further information about the settings relating to the FTP periodic image transmission.
[Image capture size]
Select the capture size of images to be transmitted
from the following.
When "4:3" is selected for "Aspect ratio"
QVGA/VGA/1280 x 960
*1
QVGA/VGA/
800 x 600 *2
When "16:9" is selected for "Aspect ratio"
320 x 180/640 x 360/
1280
x 720
*1
320 x 180/640 x 360
*2
Default:
VGA
*1
SP306
SP305
SF336
SF335
*2
SP302
SF332
