Panasonic i-Pro WV-SP102 Operating Instructions Manual Download Page 4

Page: 4 / 64

Viewer software

• It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. This soft

ware can be installed directly from the camera or by double clicking "nwcv4Ssetup.exe" on the CD-ROM pro

vided, and then following the on-screen instructions.

Important:

• The default setting of "Automatic installation of Viewer software" is

"On". Follow the instructions on page 63 when the message is dis

played on the information bar of the browser.

• When the "Live" page is displayed for the first time, the install wiz

ard of the ActiveX control required to display images from the cam

era will be displayed. Follow the instructions of the wizard.

• When the install wizard is displayed again even after completing the

installation of the ActiveX, restart the PC.

• The viewer software used on each PC should be licensed individu

ally. The number of installations of the viewer software from the
camera can be checked on the [Upgrade] tab of the "Maintenance"
page (

☞

page 54). Refer to your dealer for the software licensing.

Summary of Contents for i-Pro WV-SP102

































































Search results

Summary of Contents for i-Pro WV-SP102

Reviews:

Related manuals for i-Pro WV-SP102

Brands by name

Popular brands

Panasonic i-Pro WV-SP102, Operating Instructions Manual

Search results

Summary of Contents for i-Pro WV-SP102

Reviews:

Related manuals for i-Pro WV-SP102

Brands by name

Popular brands