VQT3P50
9
i
If there is liquid on the surface, wipe it off with a soft dry cloth.
i
The integrity of the rubber seals decreases after about 1 year. It is strongly
recommended that you have the seals replaced (subject to a fee) at least
once a year at the store where the camera was purchased or at nearby
service center.
3
1
With the battery cover lock released, press the battery cover to
close it.
h
To prevent water seeping into the camera, make sure that foreign
matter such as liquids, sand, hair or dust is trapped between the
cover and the camera body.
2
Push the battery cover lock to the left to lock it.
h
The colored label is visible when the battery cover lock is not
completely closed. Be sure to close the lock completely so that the
colored label is not visible.
3
Close the terminal cover firmly until you hear it “click” shut and
the red part of the terminal cover lock is no longer visible.
h
If the camera is used without the covers securely closed, they may
open on their own.
1
3
2
Terminal cover lock
Battery cover lock