Panasonic HX-WA10A Owner'S Manual Download Page 116

Page: 116 / 188

116

VQT3P50

OPT

ION SET

TINGS

TV output setting (page 113)

Specify the type of image signal that is output from your camera’s USB/AV
terminal.

Select [TV OUTPUT], and press
the SET button.
TV SYSTEM:

Set the type of TV signal that is
output from the USB/AV terminal.

TV ASPECT:

Set the TV’s aspect ratio.

HDMI:

Set the signal that is output from
the HDMI terminal.

VIERA Link:

Set the VIERA Link function.

Select the desired setting, and press the SET button.

The screen to change the parameter for the selected setting appears.

<If [TV SYSTEM] is selected>

NTSC:

Outputs NTSC video signals.

PAL:

Outputs PAL video signals.

<If [TV ASPECT] is selected>

16:9:

Use this setting when a TV having an aspect ratio of 16:9 is
connected.

4:3:

Use this setting when a TV having an aspect ratio of 4:3 is
connected.

<If [HDMI] is selected>

AUTO:

The camera automatically determines the appropriate setting.

720p:

Choose this setting if the video was recorded in the

mode.

1080i:

Choose this setting if the video was recorded in the

mode.

480p:

Choose this setting if the video was recorded in the

mode.

Does not work with 480i connector.

SET

NTSC

16:9

TV OUTPUT

TV SYSTEM

TV ASPECT

HDMI

VIERA Link

ENTER

AUTO

Summary of Contents for HX-WA10A





























































































































































































Search results

Summary of Contents for HX-WA10A

Reviews:

Panasonic HX-WA10A, Owner'S Manual, Page: 116 / 188

Search results

Summary of Contents for HX-WA10A

Reviews: