Panasonic HX-WA10A Page 162 Owner'S Manual Download

Page: 162 / 188

162

VQT3P50

IMP

T MESSA

GES AND A

ER
TS

IMPORTANT MESSAGES AND ALERTS
IMPORTANT MESSAGES AND ALERTS

COMMONLY ASKED QUESTIONS

If you have a question about the camera operation, you might find the answer
in this compilation of commonly asked questions.

Question

Answer

Action

Power

Why doesn’t the
power turn on?

Due to cold
temperatures, the
battery pack
temporarily lost its
power.

Place the camera in
your pocket to warm
it up before using it.

Why is the battery
pack consumed
so quickly even
after it was fully
recharged?

The ambient
temperature is
very low.

Keep the battery
pack in an
environment of 10 to
35 °C (50 to 95 °F).

The battery pack
life has expired.

If a battery becomes
depleted quickly even
after it was sufficiently
charged, it should be
assumed that the
battery has reached
the end of its service
life. Please replace it
with a new battery.

Why doesn’t
recharging end?

The battery pack
life has expired.

Replace with a new
battery pack. If this
is not effective,
consult your dealer.

Why does the

icon appear?

The remaining
battery pack
power is low.

Use the AC adaptor,
or replace the
battery pack with a
fully charged one.

Shooting

Why is the status
indicator lit red?

A recorded file is
being saved on
the card or built-in
memory.

Not a malfunction.
Wait until the status
indicator turns off.

Why doesn’t the
flash operate?

The camera has
determined that
the image is bright
enough and the
flash is not
necessary.

Not a malfunction.
Capture the image;
the camera will
determine when the
flash is necessary.

Summary of Contents for HX-WA10A





























































































































































































Search results

Summary of Contents for HX-WA10A

Reviews:

Related manuals for HX-WA10A

Brands by name

Popular brands

Panasonic HX-WA10A, Owner'S Manual

Search results

Summary of Contents for HX-WA10A

Reviews:

Related manuals for HX-WA10A

Brands by name

Popular brands