manualshive.com logo in svg

Panasonic HX-WA10A, Owner'S Manual, Page: 160 / 188

Share
Download
Panasonic HX-WA10A Owner'S Manual Download Page 160

160

VQT3P50

COPYING/DUBB

ING

COPYING/DUBBING
COPYING/DUBBING

COPYING/DUBBING

Dubbing in standard picture quality

Images played back on this unit can be dubbed onto a DVD recorder or video 
device.

i

Images can be played back even on devices other than high-
definition compatible devices, so this is recommended when dubbing 
videos for distribution.

1 

Connect this unit to a video device and then change to the playback 
mode.

2 

Start playback on this unit.

Change the video input on the video device and TV that this unit is 
connected to.

i

The channel set will differ depending on the terminal to which the unit is 
connected.

i

See the owner’s manual of the video device for details.

i

Insert the plugs as far as they will go.

i

Do not use any other AV cables except the supplied one.

Yellow

AV cable (supplied)
To USB/AV terminal

White (L)

Red (R)

VIDEO IN

AUDIO IN

Summary of Contents for HX-WA10A





























































































































































































Reviews:

No comments