background image

2

This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the litera-
ture accompanying the product.

FCC 

FCC WARNING:

This equipment may generate or

use

radio 

frequency energy. Changes or modifications

to this equipment may cause harmful interference
unless the modifications are expressly approved in the

instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.

REGULA

TORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commer-
cial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.

A suitable conduit entries, knock-outs or glands

shall 

be provided in the cable entries of this prod-

uct in the end user.

Caution: Danger of explosion if battery is incor-
rectly replaced. Replaced only with the same or
equivalent type recommended by the manufac-
turer. Dispose of used batteries according to the
manufacturer’s instructions.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT

OPEN

Color Video Camera

Instruction Manual

Models :

Before installing, operating or adjusting this

product, please read this instruction booklet

carefully and completely.

LS300N-B1

LS300P-D1

LS300N-D1

LS300P-B1

LS300P-C1

Summary of Contents for LS300N-B1
















Reviews: