Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual Download Page 39

Page: 39 / 166

Chapter

Recording

and
Pla
ybac

Interval recording (INTERVAL REC)

This function is used to record 1 frame at the time interval
set in the INTERVAL TIME item.

1frame

recording

1frame

recording

1frame

recording

(time)

SetINTERVAL

TIMEsetting

SetINTERVAL

TIMEsetting

CheckthattheSYSTEMSETUPscreenisset
upasdescribedonpage.

For details on menu operation, refer to [Using the
menus] (page 120).

SelectINTERVALinthemenuoptionREC
FUNCTIONintheRECORDINGSETUP
screen.

SetthetimeinthemenuoptionINTERVAL
TIMEintheRECORDINGSETUPscreen.

PresstheRECbutton.

• The camera will repeat 1-frame recording for the

time interval set in the INTERVAL TIME option.

• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or

select NORMAL in the REC FUNCTION option.

• The following indications appear to the left of the

operation status display.

• During recording: “I-REC” stays lit.
• During a pause: “I-PAUSE” stays lit.

When a setting of less than 2 seconds is made
in step 3, “I-REC” blinks according to time
setting during recording.

• When stopped: “I-” in “I-PAUSE” blinks.



NOTE

• The pre-recording function is not available.
• Sound is not recorded.
• Data recorded (until the STOP button is pressed) in

this mode is recorded as a single file.

• There is no output from the DVCPRO/DV connector.

One-shot recording
(ONE SHOT REC)

This function records a single shot at each unit of time
which has been set.

CheckthattheSYSTEMSETUPscreenisset
upasdescribedonpage.

For details on menu operation, refer to [Using the
menus] (page 120).

SelectONESHOTinthemenuoptionREC
FUNCTIONintheRECORDINGSETUP
screen.

SetthetimeinthemenuoptionONESHOT
TIMEintheRECORDINGSETUPscreen.

PresstheRECbutton.

• The camera will pause recording after making a

recording that lasts the duration set in step 3.

• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or

select NORMAL in the REC FUNCTION option.

• The following indications appear to the left of the

operation status display.

• During recording: “I-REC” stays lit.
• During a pause: “I-PAUSE” stays lit.
• When stopped: ”I-“ in “I-PAUSE” blinks.



NOTE

•  No other functions are available during operation.
•  The pre-recording function is not available.
•  Sound is not recorded.
•  Data recorded (until the STOP button is pressed) in

this mode is recorded as a single file.

• There is no output from the DVCPRO/DV connector.
• During continuous one-shot recording, recording

operation speed may be decreased.

Summary of Contents for HPX300 - Camcorder - 1080p







































































































































































Search results

Summary of Contents for HPX300 - Camcorder - 1080p

Reviews:

Related manuals for HPX300 - Camcorder - 1080p

Brands by name

Popular brands

Panasonic HPX300 - Camcorder - 1080p, Operating Instructions Manual

Search results

Summary of Contents for HPX300 - Camcorder - 1080p

Reviews:

Related manuals for HPX300 - Camcorder - 1080p

Brands by name

Popular brands