10
Chapter
Manipulating
Clips
with
Thumbnails
Changing thumbnails
It is possible to replace thumbnails with images that
include previously attached text memos while images are
recorded or played back.
1
Addtextmemostoimagesthatyouintendto
change.
• For details on how to add text memos, refer to
[Text Memo Recording Function] (page 41).
2
SelectTHUMBNAIL
TEXTMEMOCLIPSto
displaythumbnailsoftheclipswithtextmemos.
3
Placethepointerontheclipofthethumbnail
thatyouintendtochange,andthenpress
SETbutton.Movethepointertothetextmemo
displayonthelowerrow.
4
Selectthethumbnailthatyouintendto
replace,placethepointeronit,andthenselect
OPERATION
EXCH.THUMBNAILonthe
thumbnailmenu.
5
PressSETbutton.WhentheYES/NO
confirmationwindowisdisplayed,selectYES
byusingthecursorbuttonandtheSETbutton.
• The menu closes and the thumbnail for the clip is
replaced.
NOTE
Display clip properties by selecting PROPERTY
CLIP
PROPERTY on the thumbnail menu to confirm the position of
the thumbnail (the number of frames from the top of the
clip). Since thumbnails come generally from the top of the clip,
“0” is displayed.
Shot Mark
A shot mark can be added to a clip thumbnail to
distinguish this clip from other clips.
1
PresstheTHUMBNAILbutton.
• The thumbnail screen appears on the LCD
monitor.
2
Usethecursorbuttonstomovethepointer
overthecliptowhichyouwanttoattachashot
mark.
3
PresstheUSERbuttonorRETbuttontowhich
theshotmarkfunctionhasbeenassigned.
• This adds a shot mark to the thumbnail of the
clip at the pointer position.
To delete a shot mark, place the pointer on the
clip a second time and press the USER button or
RET button to which the shot mark function has
been assigned.
USERMAIN,USER1andUSERbuttons
NOTE
• A shot mark can be attached during recording.
• Adding shot marks after recording stops, attaches the shot
mark to the most recently recorded clip.
Please refer to [Shot Marker (SHOT MARK) Recording Function]
(page 41) for more information.
• When adding a shot mark to (or deleting the shot mark from)
a clip recorded across multiple P2 cards, do this with all
these P2 cards inserted into P2 card slots.
