Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual Download Page 3

Page: 3 / 166

FCC NOTICE (USA)

Declaration of Conformity

Model Number:

AG-HPX300P

Trade Name:

Panasonic

Responsible Party:

Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ

07094

Support contact:

Panasonic Broadcast & Television Systems Company 1-800-524-1448

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any

unauthorized modifications.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference”

available from FCC local regional offices helpful.

FCC Warning:

To assure continued FCC emission limit compliance, follow the attached installation instructions and

the user must use only shielded interface cables when connecting to host computer or peripheral

devices. Also, any unauthorized changes or modifications to this equipment could void the user’s

authority to operate this device.

NOTIFICATION (Canada)

This class B digital apparatus complies with Canadian ICES-003.

indicatessafetyinformation.

IMPORTANT

“Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the

right of copyright owners and be contrary to copyright laws.”

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

A rechargeable battery that is recyclable powers the product you have perchased.

Summary of Contents for HPX300 - Camcorder - 1080p







































































































































































Search results

Summary of Contents for HPX300 - Camcorder - 1080p

Reviews:

Related manuals for HPX300 - Camcorder - 1080p

Brands by name

Popular brands

Panasonic HPX300 - Camcorder - 1080p, Operating Instructions Manual

Search results

Summary of Contents for HPX300 - Camcorder - 1080p

Reviews:

Related manuals for HPX300 - Camcorder - 1080p

Brands by name

Popular brands