Panasonic HC-V770 Owner'S Manual Download Page 60

Page: 60 / 246

- 60 -

∫

To change the level of image contrast correction

[HDR EFFECT] allows you to change the contrast correction level in HDR Movie Mode.

≥

Change the Recording Mode to

. (

)

Select the menu.

Touch [ENTER].

≥

Touch [EXIT] to complete the settings.

≥

You can also change this setting by touching its operation icon. (

)

≥

You may not see the full effect depending on the recording conditions.

≥

Change the Recording Mode to

. (

)

Touch the desired Scene Mode.

≥

Touch [ENTER].

≥

(Sports/Portrait/Soft Skin/Spotlight/Snow/Beach/Sunset/Scenery)

The shutter speed is 1/8 or more in Still Picture Recording Mode.

≥

(Sunset/Low Light)

The shutter speed is 1/30 or more in Motion Picture Recording Mode.

≥

(Sunset/Scenery/Fireworks/Night Scenery)

Image may get blurry when close object is recorded.

: [RECORD SETUP]

[HDR EFFECT]

desired setting

Sets the correction level to high.

Sets the correction level to low.

Scene Mode

Mode

Effect

Sports:

To make fast moving scenes less shaky with slow playback and
pause of playback

Portrait:

To make people stand out against the background

Soft Skin:

To makes skin colors appear softer for a more attractive
appearance

Spotlight:

Improved quality when subject is brightly illuminated.

Snow:

Improved image quality when shooting in snowy locations.

Beach:

To make blue in the sea or sky vibrant

Sunset:

To make red in the sunrise or sunset vibrant

Scenery:

For spatial scenery

Fireworks:

To capture the fireworks in the night sky beautifully

Night Scenery:

To capture the evening or night scenery beautifully

Low Light:

For dark scenes, such as at dusk
(In Motion Picture Recording Mode only)

MENU

Summary of Contents for HC-V770























































































































































































































































Search results

Summary of Contents for HC-V770

Reviews:

Related manuals for HC-V770

Brands by name

Popular brands

Panasonic HC-V770, Owner'S Manual

Search results

Summary of Contents for HC-V770

Reviews:

Related manuals for HC-V770

Brands by name

Popular brands