Panasonic HC-V770 Owner'S Manual Download Page 120

Page: 120 / 246

- 120 -

Protecting scenes/still pictures

Scenes/still pictures can be protected so that they are not deleted by mistake.

(Even if you protect some scenes/still pictures, formatting the media will delete them.)

≥

Press the recording/playback button to switch this unit to the Playback Mode.

Select the menu.

* [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected

transfer setting device in advance on the computer.

Touch the scene/still picture to be protected.

≥

When touched, the scene/still picture is selected and the

indication appears on the

thumbnail. Touch the scene/still picture again to cancel the operation.

≥

Touch [Return] to complete the settings.

≥

When the thumbnails of still pictures recorded in Stop Motion Animation Assist Mode are
displayed, protection cannot be set on the still pictures.

: [VIDEO SETUP] or [PICT. SETUP]

[SCENE PROTECT]

MENU

Summary of Contents for HC-V770























































































































































































































































Search results

Summary of Contents for HC-V770

Reviews:

Related manuals for HC-V770

Brands by name

Popular brands

Panasonic HC-V770, Owner'S Manual

Search results

Summary of Contents for HC-V770

Reviews:

Related manuals for HC-V770

Brands by name

Popular brands