- 48 -
≥
(Night Scenery)
j
The shutter speed is 1/2 or more in Still Picture Recording Mode.
j
Using a tripod is recommended.
Endless Loop Recording
≥
Insert an SD card.
≥
Change the Recording Mode to
. (
l
40
)
1
Select sound in loop recording setting.
2
Start recording.
≥
Once you start recording, the scene will be automatically divided every 2 minutes. The divided
scenes will be saved in the SD card. (Each time you use Endless Loop Recording, a set of up to
30 scenes will be saved.)
≥
When the period between the time you start recording and the time you stop recording is longer
than 1 hour (approximate), only the last 1 hour (approximate) part up to the end of the recording
will be saved. The part before the 1 hour part will be deleted.
≥
Recording stops automatically when approximately 24 hours have passed since the start of the
recording.
≥
During recording, the
blinks.
≥
The remaining recordable time and elapsed recording time are not displayed. (
l
21
)
≥
Only when sound in loop recording is set to [ON],
(microphone input level meter) is
displayed.
To switch sound in loop recording
The menu can be set to switch to sound in loop recording.
≥
Still pictures cannot be taken.
≥
[REC FORMAT] is set to [MP4/iFrame], and [REC MODE] is set to [720].
≥
Image Stabilizer Function is set to
(setting canceled) and Level Shot Function is set to off.
≥
Endless Loop Recording is not possible in the following cases:
j
When the SD card is not inserted
j
When the approximate remaining recordable time on the SD card is less than 1 hour
(The time between R 0h00m and R 0h59m flashes red.)
≥
Since each set of loop-recorded scenes is displayed separately on the date list, it is convenient to
play back loop-recorded scenes by date. (
l
75
)
(The date displayed on the date list will be the one on which you started Endless Loop
Recording.)
[ON]:
Records sound.
[OFF]:
Recording of sound is off.
: [RECORD SETUP]
#
[Sound In Loop Recording]
#
[ON] or [OFF]
MENU
