- 114 -
Using a smartphone, you can perform record/playback operations from a remote location or upload
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).
A
When connecting directly to a smartphone
B
When connecting to a wireless access point
≥
Refer to [Help] in the “Image App” menu about how to operate.
Preparations before using [Link to Cell]
1
Install the smartphone application “Image App” on your smartphone. (
l
141
)
2
Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥
If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
∫
If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the smartphone.
≥
Proceed to “Using [Link to Cell] with a direct connection”. (
l
116
)
Wi-Fi
[Link to Cell]
≥
You need to turn on the Wi-Fi function of your smartphone.
≥
Do not remove the SD card during remote operations.
Caution:
Be sure to pay special attention to the privacy, the Portrait rights, etc. of the subject when you use
this function. Use at your own risk.
Setting up a direct Wi-Fi connection between this unit and a
smartphone