Panasonic GT32-R User Manual Download Page 135

Page: 135 / 206

5-13

Code No.

Content

Cause and solution

**20FF

Token error

There is a GT
unresponsive to the
token.

When the error code is indicated for a certain period of time after
the power supply turned on.:

1. The timings for turning on multiple GT units are different.

Arrange the wiring that enables the power supplies to be
simultaneously turned on.

2. The screen displays for all GT units have not completed.

The error code disappears when the screen displays for all
GT units have completed.

3. The settings for the startup screen display vary.

Make the same setting for all the connected GT units.

When the error code is always indicated:

1. There is an unconnected or faulty GT.

Check if there is a GT indicating [**20FF]. Reconnect the GT,
or turn off the bit in the connected GT designation area.

2. The communication parameters are not specified correctly.

Check the baud rate and transmission format for the GT.

3. The same station number is used for more than one GT units.

Check the station number setting of the connected GT units.

4. Another GT is reading a SD card.

The indication disappears when reading the SD card has
completed.

**F000

User

’s memory error

The memory for saving screen data may be damaged. Please
contact us.



When Connected to Modbus

For GT01, GT11 and GT21

Code No.

Content

Cause and solution

ERFE

Response error
There is an abnormal
response returned
from the external
device.

Check the data to be returned from the external device.

For GT02, GT02L, GT03-E, GT05, GT12, GT32, GT32-R and GT32-E

Code No.

Content

Cause and solution

**00FF

Time up error
There is no response
from the PLC.

1) PLC connection cable is disconnected. Check the wiring of
the connection cable and check for disconnection.
2) It is a temporary error caused by noise, etc. Turn on the
power supplies for PLC or GT again.

**00FE

Response error
There is an abnormal
response returned
from the external
device.

Check the data to be returned from the external device.

Summary of Contents for GT32-R















































































































































































































Search results

Summary of Contents for GT32-R

Reviews:

Related manuals for GT32-R

Brands by name

Popular brands

Panasonic GT32-R, User Manual

Search results

Summary of Contents for GT32-R

Reviews:

Related manuals for GT32-R

Brands by name

Popular brands