20
z
Move the cursor to "DTL MODE" of the "SCENE FILE"
screen and press the [SEL] button.
→
The "DTL MODE" screen appears.
x
Move the cursor to "PATTERN", select a pattern from
among "1", "2" and "3" and press the [SEL] button.
→
The setting contents of "DTL BAND" and "DTL
LEVEL" are applied to "USER".
The band and level can be manually adjusted in
"USER". Perform adjustment on an as-needed
basis.
Be sure to view a monitor when the adjustment is
performed.
Note:
• The band and level can also be adjusted directly
without applying any of the patterns, "1", "2" and "3" to
"USER".
c
Move the cursor to "DTL BAND" and adjust the band
with use of the [
e
] or [
f
] button.
When the level indicator moves in the "+" direction,
the edge becomes thinner (the band becomes high-
er). When the level indicator moves in the "–" direc-
tion, the edge becomes thicker (the band becomes
lower).
v
Move the cursor to "DTL LEVEL" and adjust the level
with use of the [
e
] or [
f
] button.
When the level indicator moves in the "+" direction,
the image becomes sharper. When the level indicator
moves in the "–" direction, the image becomes softer.
Note:
• Jaggies may appear on the edge of a photographic
subject, but this phenomenon is not abnormal. If this
phenomenon is not favorable, decrease "DTL BAND"
or "DTL LEVEL" to adjust the image quality.
[RED DTL] Adjusts the enhancement of red
edge.
The red edge enhancement level of images through the
camera is adjusted.
The enhancement level is selectable from the following:
OFF (default):
No edge enhancement is performed on
the red portion.
LOW:
The low level of edge enhancement is performed
on the red portion.
HIGH:
The high level of edge enhancement is performed
on the red portion.
[GAMMA] Adjusts the gamma level.
Be sure to view a waveform monitor or a color video mon-
itor when the gamma correction is performed.
Move the cursor to "GAMMA" and adjust the gamma level
with use of the [
e
] or [
f
] button.
When the level indicator moves in the "+" direction, the
correction level becomes larger. When the level indicator
moves in the "–" direction, the correction level becomes
smaller.
8. Scene file setting [SCENE FILE]
Registration of details, gamma, hue, etc. as a scene file
in accordance with an installation location allows users to
employ the registered contents only by pressing the
[SCENE] button on the front face of the CCU.
Up to 3 scene files can be registered.
Scene file registration is performed on the "SCENE FILE"
screen. When a scene file to be registered on the top
screen, "SCENE FILE", in the SETUP menu is selected
and the [SEL] button is pressed, the "SCENE FILE"
screen appears. The "SCENE FILE" screen consists of 2
pages of contents. The selected scene file number
appears beside the screen title.
The characters specified at "FILE LABEL" are displayed
at "LABEL". The default is blank.
[DTL MODE] Specifies the details.
The band and level of the edge correction are specified.
Scene file number
** SCENE FILE 1 ** P1
LABEL:................
DTL MODE *MANU
RED DTL OFF
GAMMA ....
|
.... 45
KNEE *MANU
BLACK STRETCH OFF
D-RANGE NORMAL
WHITE CLIP ....
|
....110
RET END
** SCENE FILE 1 ** P2
LABEL:................
FLARE COMP OFF
DNR LOW
MATRIX *USER
CHROMA GAIN .....
|
...160
TOTAL PED ....
|
.... 76
FILE LABEL *OFF
AWC MEMORY 1
RET END
** SCENE FILE 1 ** P1
LABEL:................
DTL MODE *MANU
RED DTL OFF
GAMMA ....
|
.... 45
KNEE *MANU
BLACK STRETCH OFF
D-RANGE NORMAL
WHITE CLIP ....
|
....110
RET END
"SCENE FILE" screen
"SCENE FILE" screen
** DTL MODE **
PATTERN USER
DTL BAND . . . .
|
4
–
+
DTL LEVEL ....
|
.... 16
–
+
RET END
"DTL MODE" screen