Panasonic FPS Series, User Manual

Page: 114 / 332

FP Σ User's Manual
6.8 Backup Battery
97
4. Choose "Enable" in the list box of item no. 4 "Battery error indication"
6.8.3 Specifying Hold Areas
If no battery is installed, only the fixed hold areas (default address ranges of system registers
6 to 14) will be saved when the PLC is turned off. With the optional backup battery it is
possible to save additional hold areas.
1.
2.
3.
Procedure
1. Double-click "PLC" in the navigator
2. Double-click "System Registers"
3. Double-click "Hold On/Off"
Enter the desired values for hold areas in system registers no. 6 to 14. (For
internal relays and data registers, a dialog box opens in which you can adjust the
values.)
CAUTION
Do not change the default values if no battery is installed. If the battery is empty
or no battery is present and additional hold areas have been defined, the
hold/non-hold operation becomes unstable.
6.8.4 Lifetime of the Backup Battery
The backup battery will eventually die. Therefore it is important to replace it periodically. Refer
to the table below as a guide for when to replace the battery.
Item Description
Battery life
220 days or more if no power at all is supplied (typical lifetime in actual use: approx. 840
days at 25°C/70°F)
Suggested replacement interval: 1 year