Panasonic FMU, Technical Manual

Page: 52 / 77

FMU Technical Manual 5.3 FMU_DataExchange
43
The following error numbers are valid for the error event if "Error remote address" is not equal to
255.
ErrEvent Explanation Source of error Recommendation
0
No errors.
1
Device guarding failed after device
was operational. Device Check if device is still running.
30
Device access timeout. Device Device does not respond. Check
the baud rate and MAC ID.
32
Device rejects access with unknown
error code. Device Use single-device diagnostic to
get reject code.
35
Device response in allocation phase
with connection error. Device Use single-device diagnostic to
get additional reject code.
36
Connection produced (process data
input length from the FMU's
point-of-view) is different from the one
configured. Device/configuration Use single-device diagnostic to
get true produced connection
size.
37
Size of connection consumed
(process data output length from the
FMU's point-of-view) is different from
the one configured. Device/configuration Use single-device diagnostic to
get true consumed connection
size.
38
Device service response telegram
unknown and not handled. Device/configuration Use single-device diagnostic to
get true consumed connection
size.
39
Connection already requested. Device Connection will be automatically
released.
40
Number of CAN message data bytes
read in the produced or consumed
connection size response unequal to
4. Device Device cannot operate with the
FMU and norm description.
41
Predefined master-slave connection
already exits. Device/FMU Connection will be automatically
released.
42
Length in polling device response
unequal to produced connection size. Device
43
Sequence error in device polling
response. Device Two initial segments in
multiplexed transfer were
received.
44
Fragment error in device polling
response. Device Fragmentation counter during
multiplexed transfer differs from
the one expected.
45
Sequence error in device polling
response. Device Middle or last segment was
received before the first
segment.
46
Length in bit strobe device response
unequal to produced connection size. Device
47
Sequence error in device COS or
cyclic response. Device Two initial segments in
multiplexed transfer were
received.
48
Fragment error in device COS or
cyclic response. Device Fragmentation counter during
multiplexed transfer differs from
the one expected.
49
Sequence error in device COS or
cyclic response. Device Middle or last segment was
received before the first
segment.