Panasonic EYADA Series, Operating Instructions Manual

Page: 97 / 120

39
EN
BEFORE USE
PREP
ARA
TION
OPERA
TION
OTHERS
NOTIFICATION MENU (n + NUMBER)
n1 Lamp Lighting Colour Setting
You can set the lighting colour of the
detection lamp.
■
Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
P. 22
Choose “n1” by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is “_1”.
Display Lamp lighting colour
OFF (Off)
Fastening OK: Green
Count-up
(Count complete): Blue
Fastening OK: Blue
Count-up
(Count complete): Green
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
n2 Buzzer Pattern Setting
You can set the buzzer pattern for
count-up (count complete).
■
Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
P. 22
Choose “n2” by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is “_1”.
Display Buzzer pattern
A long beep
Three short beeps
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
EY9310ADA202.indb 39 EY9310ADA202.indb 39 2023/12/07 19:02:01 2023/12/07 19:02:01