Panasonic EYADA Series, Operating Instructions Manual

Page: 111 / 120

53
EN
BEFORE USE
PREP
ARA
TION
OPERA
TION
OTHERS
■
Error codes for errors that occur during work.
Display Possible cause Action
During a fastening
process, the tool was
stopped before the
clutch activated.
Nothing is wrong with the
product.
Keep the tool in action until
the clutch activates.
During a fastening
process, the rotation time
has become higher than
the upper limit or lower
than the lower limit.
Nothing is wrong with the
product.
Check the workpiece and the
setting for the rotation time.
P. 35
During a fastening
process, the forward/
reverse lever was
switched.
Do not switch the forward/
reverse lever during a
fastening process.
During a fastening
process, the tool was
overloaded or the motor
failed.
Eliminate the condition(s)
that caused the overload and
recheck the condition.
When this does not eliminate
the problem, send the tool
for repair.
During a fastening
process, a cord or
cords became poorly
connected.
Check whether the cords
are correctly connected
and whether no cords are
broken.
When no abnormality is
found in the cords, the power
adapter may be failed. Send
the tool for repair.
During a fastening
process, the internal
protective sensor
became out of order.
Send the tool for repair.
During a fastening
process, the tool
became hot.
Interrupt the work and wait
for it to cool down before use.
EY9310ADA202.indb 53 EY9310ADA202.indb 53 2023/12/07 19:02:04 2023/12/07 19:02:04