88
Installation Manual
Maintenance, Cleaning & Service
Accessing Wiring
Initiate a Rapid Shutdown and allow the DC voltage to drop to a safe level.
Power down inverter and disconnect all wiring sources of AC and DC
power.
WARNING:
Exposed hazardous voltage, during servicing or
for emergency procedures to avoid hazardous voltage, turn
off the “BATTERY DISCONNECT” and all AC breakers located
inside the Distribution Box behind the thumb screw latched
access door. To enable Lock-Out-Tag-Out per the Standard
for Electrical Safety in the Workplace, NFPA 70E, and the
Standard for Workplace Electrical Safety, CSA Z462 put a lock
on the lockable access door.
WARNING:
These servicing instructions are for use by
qualified personnel only. To reduce the risk of electric shock,
do not perform any servicing other than that specified in the
operating instructions unless you are qualified to do so.
