Chapter 4
Settings — [OPTION] menu
60 - ENGLISH
[DISABLE]
Does not control the device by command when the “ID ALL” command is received.
[ENABLE]
Controls the device by command when the “ID ALL” command is received.
Setting [GROUP]
Set the group of this device. Control of the device by command is performed when the ID designation in the
command matches.
When the system is made up of multiple devices, such as connecting the display (projector or flat panel display)
via the <DIGITAL LINK OUT 1> terminal/<DIGITAL LINK OUT 2> terminal of this device, devices in the same
group can be controlled simultaneously.
1) Press
as
to select [RS-232C].
2) Press the <ENTER> button.
f
The
[RS-232C]
screen is displayed.
3) Press
as
to select [GROUP].
4) Press
qw
to switch items.
f
The item is switched every time the button is pressed.
[A] - [Z]
Select the group.
Setting [RESPONSE(GROUP)]
Set the control of this device when the “ID GROUP” command is received.
1) Press
as
to select [RS-232C].
2) Press the <ENTER> button.
f
The
[RS-232C]
screen is displayed.
3) Press
as
to select [RESPONSE(GROUP)].
4) Press
qw
to switch items.
f
The item is switched every time the button is pressed.
[ON]
Returns the response when the “ID GROUP” command is received.
[OFF]
Does not return the response when the “ID GROUP” command is received.
[NETWORK]
Perform the setting of the network function.
Setting [NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press
as
to select [NETWORK].
2) Press the <ENTER> button.
f
The
[NETWORK]
screen is displayed.
3) Press
as
to select [NETWORK SETUP].
4) Press the <ENTER> button.
f
The
[NETWORK SETUP]
screen is displayed.
5) Press
as
to select each item, and change the setting following the instruction of the menu.
[DHCP]
[ON]
Automatically acquires an IP address when a DHCP server exists in
the network connected by the <LAN> terminal of this device.
[OFF]
Perform the [IP ADDRESS], the [SUBNET MASK], and the
[DEFAULT GATEWAY] settings when a DHCP server does not exist
in the network connected by the <LAN> terminal of this device.
[IP ADDRESS]
Enter the IP address when a DHCP server is not used.
