6 - ENGLISH
This is a projector mount bracket (Model No.: ET-PKC300B) used to replace the projector mount bracket of an
existing wall mount bracket.
For details on how to replace the projector mount bracket, refer to “Replacing projector mount bracket (ET-
PKC300B)” (
x
page 20).
■
Structural components
Parts name
Form (number of parts)
Applications
Projector mount
bracket
× 1
This is used to install the projector to the
wall mount bracket.
Screws
Screw with captive washer (M6×16)
× 4
These are used to secure the projector
mount bracket to the projector.
Screw with captive washer (M4×14)
× 5
These are used to secure the connecting
plate, which is removed from the existing
wall mount bracket, to the projector mount
bracket.
Projector drop-
prevention kit
Screw with captive washer (M6×16)
× 1
Prevents the projector from falling.
Use one of the two wire ropes.
Wire rope
[3.0 mm (1/8") wire diameter, 750 mm (29-17/32") length]
× 1
Wire rope
[3.0 mm (1/8") wire diameter, 660 mm (25-31/32") length]
× 1
Flat washer (M6)
× 1
z
Store small parts in an appropriate manner, and keep them away from children.
z
Tightening torque for the screw is M4: 1.25 ± 0.2 N·m, M6: 4 ± 0.5 N·m.
z
When tightening up the screws, use a tool such as a torque screwdriver. Do not use electric screwdrivers or impact screwdrivers.
Attention
z
Dispose of the packaging materials properly after taking the product out of it.
Product description (ET-PKC300B)
