ENGLISH - 21
Replacing projector mount bracket (ET-PKC300B) (continued)
Installing the connecting plate
1)
Align the ends of the four long holes on the connecting plate to the four screw holes on the projector
mount bracket.
z
Make sure the arrow marks on the connecting plate point to the left and the “CENTER” mark on the
projector mount bracket is in the front side. (Fig.1)
2) Secure the connecting plate to the new projector mount bracket using the supplied four captive
washer screws (M4 × 14). (Fig.2)
3)
Install the supplied drop-prevention wire rope and the new projector mount bracket to the projector.
z
For details, refer to “Attaching the projector drop-prevention kit” (
x
page 11) and “Installing the projector
mount bracket kit to the projector” (
x
page 11).
Fig.1
Fig.2
Screws
Ends of long holes
Arrow mark
