Panasonic ET-WBC100 Installation Instructions Manual Download Page 1

Page: 1 / 24

ENGLISH

Installation Instructions

Wall Mount Bracket

Thank you for purchasing this Panasonic Product.

The “Installation Instructions” is common to the following products.

Wall mount bracket: ET-WBC100

Projector mount bracket: ET-PKC300B

To customers

The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified

personnel to perform the installation. After installation, have the installation personnel return the “Installation

Instructions” to you, and save it for future use. When moving or removing the projector, give the “Installation

Instructions” to the installation personnel and have them perform the procedure.

To installation personnel

Carefully read the “Installation Instructions” and install this product correctly and safely.

Be sure to read through the section entitled “Read this first!” (

page 3) before proceeding with

the installation.

After installation, return the “Installation Instructions” to the customer.

DPQX1662ZA/X1

Model No.

ET-WBC100

ET-PKC300B

ENGLISH

FRANÇAIS

DEUTSCH

日本語

ET-WBC100

ET-PKC300B

Summary of Contents for ET-WBC100

























Search results

Summary of Contents for ET-WBC100

Reviews:

Related manuals for ET-WBC100

Brands by name

Popular brands

Panasonic ET-WBC100, Installation Instructions Manual

Search results

Summary of Contents for ET-WBC100

Reviews:

Related manuals for ET-WBC100

Brands by name

Popular brands