background image

Setup

16

5

Place media with the

 printing side up 

under the 

hooks in the tray.

NOTES:

When loading thick paper, card stock, coated 
paper, transparencies, labels, envelopes or 
Japanese postcards, use the multi-purpose tray. 
See “Available Media” in the 

Maintenance and 

Specifications

 section.

Most media has instructions recommending the 
side to be printed first.

Do not mix different types or thickness of media in 
the media tray at one time; this may cause a media 
jam.

Loading media exceeding the upper limit may 
cause a media jam or miss feed.

6

Confirm the media guides are adjusted to the media 
size, then make sure to fix the length guide unit.

7

Slide the media tray completely into the printer.

CAUTION:

Be sure to hold the media tray with both hands so 
that you do not drop it. The media tray weighs 
approximately 6.4 k

g

 (14 lbs.) when it is fully 

loaded.

8

Pull (

1

) and raise (

2

) the paper support so that the 

media does not drop from the output tray.

The multi-purpose tray serves as an additional tray (for  
detailed information, refer to “Available Media” in the 

Maintenance and Specifications

 section).

1

Open the tray cover (

1

) and pull it to expand the 

multi-purpose tray (

2

).

2

Separate the media guides to the approximate width 
of the media.

3

Insert media with the 

printing side down

 into the 

multi-purpose tray while adjusting the media guides 
to the media width.

Upper limit

Load media with the

printing side up

.

Hook

Paper support

1

2

Using the Multi-Purpose Tray

1

2

Media guides

Upper limit

Load media with the

printing side down

.

Upper limit

Flap

Load media with the

printing side down

.

(For Plain Paper, etc.)

(For Envelope)

Summary of Contents for ePhoto CL18

























Reviews: