EN51
Q&A
Q
A
Other
(continued)
handling
What precautions should I take to
transport the unit when moving?
Take the following precautions:
●
Recline the backrest and raise the massage heads to around the
center of the backrest. This moves the center of gravity to the center
of the unit and makes it easier to move.
●
Do not move the chair while a person is sitting in it.
①
Press
to turn the power on.
②
Press
to recline the backrest.
Hold down the two buttons until
long beeps sound.
③
Select an automatic course when the
power is on.
The massage heads move.
An error occurs and the movement
stops whenthey reach the center of the
backrest.
Massage
heads
④
Press
to turn the power off.
Be sure to press
, as
automatically raises the backrest.
⑤
Turn the power switch “off” and remove the power plug (see
EN42)
If you need to move the chair with the backrest upright, follow the steps
below.
(1) Follow steps
①→③→④
above and raise the massage heads to the
center.
(2) Press again, raise the backrest and press automatically.
●
Handle the chair with care. If you do not have the original box, use
packing materials to prevent damage or vibration.
●
When packing, check that the power cord and controller cord are not
wrapped around the main unit and take measures such as placing
them on the seat with the controller to ensure that they do not scrape
against the ground while moving.
Where is the serial number?
Under the seat surface of the unit.
lock switch
on
off
lock
open
power
2
1
00_SHW150617_MA81.indb 51
2015-12-30 11:20:19
