IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed,
including the following: Read and follow all safety instructions before using this appliance.
DANGER–
To reduce the risk of electric shock:
1) Always unplug this appliance from the electrical outlet immediately after using
and before cleaning.
2) Do not reach for an appliance that has fallen into water. Unplug immediately.
3) Do not use while bathing or in a shower.
4) Do not place or store appliance where it can fall or be pulled into a tub or sink.
Do not place or drop into water or other liquid.
WARNING–
To reduce the risk of burns, fire, electric shock, or injury to persons:
1) An appliance should never be left unattended when plugged in. Unplug from outlet when not
in use, and before putting on or taking off parts.
2) Close supervision is necessary when this appliance is used by, on, or near children,
invalids, or disabled persons.
3) Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by Conair.
4) Never operate this appliance if it has a damaged cord or plug, if it is not working properly,
or if it has been dropped or damaged, or dropped into water. Return the appliance to a
Conair Service Center for examination and repair.
5) Do not carry this appliance by supply cord or use cord as a handle.
6) Keep the cord away from heated surfaces.
7) Never operate the appliance with the air openings blocked. Keep the air openings
free of lint, hair and other particles.
8) Never drop or insert any object into any opening.
9) To disconnect, turn all controls to the off position, then remove plug from the outlet.
10) Do not use outdoors.
11) Do not operate where aerosol (spray) products are being used
or where oxygen is being administered.
12) Do not attempt to plug or unplug unit while feet are in the water.
13) Do not stand on or in the foot massager. Use only while seated. Place feet in massager and
remove feet from massager only while in a seated position.
14) Never operate on a soft surface, such as a bed or couch, where air openings may be
blocked.
OPERATING INSTRUCTIONS
CAUTIONS
• Conair
®
Massaging Foot Bath should not be used if any of the following cases exist, unless
directed by physician: Tuberculosis, benign and malignant tumors, hemorrhages, inflammations
of the skin, phlebitis and thrombosis, open and fresh wounds, bruises, broken skin or varicose
veins,undetermined calf pain, or joint pain.
• Consult your physician, if you have any questions regarding the therapeutic use
of this foot bath.
• Do not use before consulting your physician if you are experiencing unexplained pain or swollen
muscles, or have any history of serious muscular injury.
• Keep away from children.
• Discontinue use of massager if pain increases or swelling occurs after application.
• If you are pregnant, please consult your physician before using.
USER/MAINTENANCE INSTRUCTIONS
1) Make sure foot bath is in “off” position.
2) Place foot bath on floor, fill with warm or cold water and plug into wall outlet.
Never plug or unplug the foot bath while your feet are in water.
3) The heat setting is designed to maintain the temperature of warm water, not to heat water.
4) Sit in a chair and place your feet in the water. Never stand in foot bath.
5) Position control knob to the desired setting of bubbles, massage and/or heat.
6) Turn knob to “off” position after use and disconnect from outlet before emptying water.
7) To clean foot bath, rinse with water. (Never submerge unit in water.) Wipe with a cloth.
Do not use any strong chemical cleaners such as Benzine.
8) This unit has no user serviceable parts.
9) To store: Unplug the appliance from the outlet.
Store in appliance box or a clean, dry place.To avoid breakage, do not wrap the power cord
around the unit. Do not hang the unit by the cord.
SAVE THESE INSTRUCTIONS
ATTACHMENT INSTRUCTIONS
Choose one of the 3 attachments for additional massaging of the feet. To use:
1.) Place selected attachment onto the post in the center of the foot bath. ---
2.) Place foot on attachment and apply pressure. Move your foot around for more pressure and
treatment.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for electric current, to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER
— Improper connection of the equipment-grounding conductor can result
in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product – if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the
plug illustrated in sketch (Fig. 1).
GROUNDING METHODS
Grounded Oulet
Grounding Pin
Grounded
Outlet Box
(Fig. 1)
FB10SC_IB_en.indd 1
5/31/06 1:49:40 PM
