Panasonic DP-8540 Operating Instructions Manual Download Page 202

Page: 202 / 336

200

7. TEMPLATE

2. Registering User Groups and Templates (Cont.)

Press the [REGISTRATION] button on the touch panel.

Select the desired user group, and then press the [ENTER] button.

• If the desired user group is not displayed, press the [Prev] or [Next] button to switch the menu.

Key in the password (5 digits) for the selected user group, and then
press the [ENTER] button.

• If no password was set when the user group was registered, skip to step 6.

Summary of Contents for DP-8540

















































































































































































































































































































































Search results

Summary of Contents for DP-8540

Reviews:

Related manuals for DP-8540

Brands by name

Popular brands

Panasonic DP-8540, Operating Instructions Manual

Search results

Summary of Contents for DP-8540

Reviews:

Related manuals for DP-8540

Brands by name

Popular brands