Panasonic DP-8540 Operating Instructions Manual Download Page 104

Page: 104 / 336

102

3. SETTING OF BASIC COPY MODES

4. Duplex Copying (Cont.)

Select LT copy size.

• Only LT size is available. Press the drawer button on the touch panel, or use the paper source selection ( / )

buttons to select LT size.

• If you need a binding space, select the book margin mode. (

P.112 “1.IMAGE SHIFT”)

- Set other copy modes as required.

Press the [START] button. When the data of the opened pages have
been scanned, open the next page and set the booklet on the original
glass again.

• Repeat the procedures above until all the desired pages have been scanned. If the last copy is only a single

page, press the [COPY FINAL PAGE] button on the touch panel before the scanning of this page is started.

Open and place the first page(s) on the
original glass.

• Center the booklet on the yellow indicator line with its bottom

toward you.

Summary of Contents for DP-8540

















































































































































































































































































































































Search results

Summary of Contents for DP-8540

Reviews:

Related manuals for DP-8540

Brands by name

Popular brands

Panasonic DP-8540, Operating Instructions Manual

Search results

Summary of Contents for DP-8540

Reviews:

Related manuals for DP-8540

Brands by name

Popular brands