Panasonic DP-8540 Operating Instructions Manual Download Page 58

Page: 58 / 336

2. HOW TO MAKE COPIES

2. Setting Originals (Cont.)

Single feed mode

To switch over between the continuous feed mode and the single feed mode,

P.152 “16. ADF / SADF”.

If there are more originals, set them in the same way.

• The same operation is performed whether you press the [YES] button.

After all originals have finished being fed, press the [FINISHED] but-
ton.

Align the side guides to the original
width.

Insert the original with its face up and
straight along the side guides.

• The original will be pulled in automatically. Be sure to let go of it

when the sheet starts being pulled.

• The menu of step 3 will be displayed.

Summary of Contents for DP-8540

















































































































































































































































































































































Search results

Summary of Contents for DP-8540

Reviews:

Brands by name

Popular brands

Panasonic DP-8540, Operating Instructions Manual

Search results

Summary of Contents for DP-8540

Reviews:

Brands by name

Popular brands