Panasonic DP-8540 Operating Instructions Manual Download Page 265

Page: 265 / 336

263

Take out the empty toner cartridge.

Shake the new toner cartridge well to
loosen the toner inside.

Holding the new toner cartridge horizon-
tally, pull out the seal in the direction of
the arrow.

Install the toner cartridge to the toner
cartridge holder.

• Match the label (orange) on the equipment with the shutter

(orange) on the toner cartridge, then insert the toner cartridge to
the end.

• If you cannot insert the toner cartridge completely, rotate it

slightly to check the position and insert it again.

• If the toner scatters, wipe it off completely.

Summary of Contents for DP-8540

















































































































































































































































































































































Search results

Summary of Contents for DP-8540

Reviews:

Brands by name

Popular brands

Panasonic DP-8540, Operating Instructions Manual

Search results

Summary of Contents for DP-8540

Reviews:

Brands by name

Popular brands