manualshive.com logo in svg

Panasonic DP-8540, Operating Instructions Manual

Share
Download
Panasonic DP-8540 Operating Instructions Manual Download Page 13

11

Denotes hazards that could result in minor injury or damage to the machine.

●

TO REDUCE THE RISK OF SHOCK OR FIRE, USE ONLY NO. 26 AWG OR LARGER TELEPHONE 

LINE CABLE.

●

DISCONNECT ALL POWER TO THE MACHINE BEFORE COVER(S) ARE REMOVED. REPLACE 

THE COVER(S) BEFORE THE MACHINE IS RE-ENERGIZED.

When using your telephone equipment, basic safety precautions should always be followed to reduce the 
risk of fire, electric shock and injury to persons, including the following:

●

DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE, NEAR A BATH TUB, WASH BOWL, 

KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT OR NEAR A SWIMMING POOL.

●

AVOID USING A TELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRICAL 

STORM. THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.

●

DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK.
SAVE THESE INSTRUCTIONS.

CAUTION

CAUTION

Summary of Contents for DP-8540

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands