Panasonic DMR-UBS80EG, Service Manual

Page: 44 / 93

44
Aging
Overview
• Record several programs onto the mounted HDD with DR mode until the recording capacity becomes full.
Then play back all the recorded programs (including special playback).
• When the remaining capacity becomes almost zero due to multiple recordings, the disc is formatted, recording is made onto the
same disc again and playback starts.
• Direct recording to BD-RE (V2.0) media is not possible. So firstly record 1 program with 1-hour length onto HDD with DR mode,
and then record onto BD-RE (V2.0) with FR mode.
• By performing reencode copying, almost entire BD-RE (V2.0) capacity is consumed to copy and record.
Restrictions and Notes:
1. Confirm that ATP can receive CH009 and CH090.
2. Insert a recordable BD-RE (V2.0) media into the BD drive.
3. Set the initial setting of HDD/BD drive to HDD.
4. Turn the power ON to play the BD recorder and press STOP to receive broadcasting.
5. REC Mode : HL
Flow chart for Aging Sequence