Panasonic DMR-UBS80EG, Service Manual

Page: 41 / 93

41
HARD
ERROR Drive error The drive detected a hard error. "BD drive error." Display for 5 seconds.
SELF
CHECK Restoration operation Since the power cord fell out during a
power failure or operation, it is under
restoration operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there is the possibility that
defective Digital P.C.B. / BD drive. No display
PLEASE
WAIT Unit is in termination process Unit is in termination process now.
"Good bye" is displayed and power will be
turned off.
In case "Quick Start" of setup menu is ON,
it is displayed in restoration operation for
AC off.
No display
The character indication flows
sideways.
UNFORM
AT Unformatted disc error You have inserted an unformatted BD-RE,
BD-R, DVD-RAM or DVD-RW that is
unformatted or recorded on other
equipment.
IR ERR IR communication error [IR ERR] is displayed when communication
between Timer microprocessor and IR
microprocessor fails. No display
No REC Recording is impossible [No REC] is displayed when recording is
impossible due to the defect, dirt or wound
of media. No display
HDD
ERROR [HDD ERR] is displayed when
start up of HDD was failed.
(Except error of setting of
Power on Stand-by) a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up
disc is inserted. No display
HDD NG Power on Stand-by setting
error [HDD NG] is displayed when power on
Stand-by setting of HDD is NG or when
HDD which power on Stand-by is not set to
is used.
Please try to replace HDD with genuine
HDD as service parts. No display
No ERASE Erase is impossible You cannot delete items on this disc.
The disc may be damaged. Use a new
disc. No display
No WRITE Writing is impossible You cannot write to this disc.
The disc may be damaged. Use a new
disc. No display
PROGRA
MME
FULL Timer programmes are full There are already 32 timer programmes.
Delete unnecessary timer programmes. No display
The character indication flows
sideways.
Error Code Diagnosis contents Description Monitor Display Automatic FL display