Panasonic DMR-EZ49VEB, Operating Instructions Manual

Page: 57 / 96

VQT2J51
57
Copying Titles or Playlists
[VHS]
>
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
1
Press [FUNCTION MENU].
2
Press [ 3 , 4 ] to select “Copy”, then press [OK].
3
Press [ 3 , 4 ] to select “Advanced Copy”, then press
[OK].
4
Set the copy direction.
– If you are not going to change the copying direction, press [ 4 ]
( > step
5
).
1
Press [ 3 , 4 ] to select “Copy Direction”, then press [ 1 ].
2
Press [
3
,
4
] to select “Source”, then press [OK].
3
Press [ 3 , 4 ] to select “VHS”, then press [OK].
– “Destination” is automatically set to “DVD”.
4
Press [ 2 ] to confirm.
5
Set the recording mode.
– If you are not going to change the recording mode, press [
4
]
( > step
6
).
1
Press [
3
,
4
] to select “Copy Mode”, then press [
1
].
– “Format” is automatically set to “VHS-Video”.
2
Press [
3
,
4
] to select “Recording Mode”, then press [OK].
3
Press [ 3 , 4 ] to select the mode, then press [OK].
4
Press [
2
] to confirm.
6
Set “Copy Time”.
– If you are not going to change the setting press [ 4 ] ( > step
7
).
1
Press [
3
,
4
] to select “Copy Time”, then press [
1
].
2
Press [ 3 , 4 ] to select “Time Setting”, then press [OK].
– Setting the unit to copy all the content on the video cassette
3
Press [
3
,
4
] to select “Off”, then press [OK].
4
Press [
2
] to confirm.
– Setting the unit to copy according to the set time
3
Press [ 3 , 4 ] to select “On”, then press [OK].
4
Press [
3
,
4
] to select “Copy Time”, then press [OK].
5
Press [ 2 , 1 ] to select “hour” and “min.”, then press [ 3 , 4 ]
to set the recording time.
6
Press [OK].
7
Press [
2
] to confirm.
– You can also set the recording time with the numbered buttons.
7
Press [
3
,
4
] to select “Start Copying”, then press
[OK].
8
Press [
2
] to select “Yes”, then press [OK] to start
copying.
– Copying continues until the set time even if the
playback of the programme you wish to copy finishes.
Note that copying is automatically stopped when the
tape reaches the end or the remaining capacity of the
copy destination is filled.
9
[VHS]
>
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
Press [
2
,
1
] to select “Copy & Finalise” or “Copy
Only”, then press [OK].
– If “Copy & Finalise” is selected
After finalising, the discs become play-only and you can
also play them on other DVD equipment. However, you
can no longer record or edit.
Preparation:
≥
Insert a disc and video cassette that you can use for
copying ( > 7).
≥ Confirm that there is enough remaining disc or tape space.
≥
When copying an NTSC tape to a DVD, change the “TV
System” to “NTSC” in the Setup Menu ( > 70).
This unit cannot record NTSC signals to discs that already
have PAL signal recordings.
Copying Titles (VHS
>
DVD)
Copy
VHS
DVD
1
2
3
Source
Destination
Cancel All
Copy Direction
Copy Mode
Copy Time
Start Copying
VHS

DVD
VHS-Video SP
Off
Select the copy direction.
OK
RETURN
Copy
min.
1
2
3
hour
00
2
Cancel All
Copy Direction
Copy Mode
Copy Time
VHS

DVD
VHS-Video SP
Set the time a few minutes
longer.
Tips
To stop copying
Press and hold [RETURN ] for 3 seconds.
(You cannot stop while finalising.)
To return to the previous screen
Press [RETURN ].
Notes
≥ To play DVD-R, DVD-R DL, DVD-RW (DVD-Video format)
+R and +R DL on other players, it is necessary to finalise
them after copy.
About FR mode
When “Time Setting” is set to “Off” in step
6
( > left):
≥
The recording mode is automatically selected by estimating
the remaining capacity of the disc for copying of only the
recorded parts in the video cassette (unrecorded parts will
not be recorded).
≥
When you press [OK] to start copy, the tape is automatically
fast-forwarded to the end and then fast-rewound to the
beginning before the copying is actually started. It may take
time to start copy. If the remaining capacity of the disc is
insufficient, the copying will be stopped in the middle.
≥ The recording is divided into titles every time the tape index
signals are detected.
When “Time Setting” is set to “On” in step
6
(
>
left):
≥ The recording mode is automatically determined by
estimating the remaining capacity of the disc for copying of
the contents equivalent to the recording time set from the
start point of the copying on the video cassette (unrecorded
parts will also be recorded).
≥
The recording is not divided into titles.
DMR-EZ49VEB_VQT2J51.book 57 ページ ２００９年１２月２１日 月曜日 午後５時４０分