VQT2J51
71
§
1
Depending on the connected equipment, some items may be
shaded in grey on the display and cannot be selected, or you
may not be able to change the settings.
§
2
Choose the setting to suit your TV and preference.
AV1 Output
Set according to the terminal of the connected TV.
[Video]
Select when a TV that can receive a composite signal is
connected.
[RGB 1]
Select when a TV that can receive an RGB signal is connected. If
you always would like to view the picture from the unit in RGB
signal, select this mode. The TV screen will automatically switch to
display the picture from the unit when the unit is turned on.
[RGB 2]
Select when a TV that can receive an RGB signal is connected. If
you would like to switch to display the picture from the unit only
when playback or viewing menus, select this mode.
≥
If this unit is connected with an HDMI cable, you cannot select
“RGB 1” or “RGB 2”.
AV2 Settings
Set to match the connected equipment.
≥
Press [OK] to show the following settings.
AV2 Input
Set to “RGB / Video” or “RGB” when receiving or recording RGB
output from external equipment.
[RGB / Video] The unit automatically detects whether the input
signal from the AV2 terminal is an RGB signal or
other signals and makes settings.
[RGB]
[Video]
[S Video]
Ext Link
[Ext Link 1]
When this unit is connected to a digital satellite
receiver with a 21-spin Scart cable and this unit
receives a control signal.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2]
When external equipment with a timer function is
connected.
Recording is continued while the image signal is
being sent to the unit from the external equipment.
Recording is stopped when the image signal is
halted by turning the external equipment off.
VHS Settings
3
,
4
select “VHS”
>
1
>
3
,
4
select item
>
>
Others
>
Setup
(
>
66, Accessing the Setup Menu)
All factory default settings are indicated with “Underlined”
text.
VHS
Tape Length
Set the length of the tape you are using so the unit can show the
correct remaining time.
[Auto (E-240)] The unit automatically distinguishes E30, -60, -90,
-120, -180, and -240 tapes.
[E-195]
For E195 tape
[E-260]
For E260 tape
[E-300]
For E300 tape
SQPB
To play back video cassettes recorded in S-VHS format (SQPB; S-
VHS Quasi Playback)
[Automatic]
This unit automatically detects the format in which
the recording was made and selects the same format
for playback. However, picture distortion may occur.
Therefore, set to “On” or “Off”.
[On]
Use this setting when playing back a cassette tape
recorded in the S-VHS format.
[Off]
Use this setting when playing back a cassette tape
recorded in the VHS format only.
FUN
CT
ON
M
EN
U
OK
Setup
Picture
Sound
VHS
Display
Tuning
Others
RETURN
SELECT
TAB
SQPB
Tape Length
Auto (E-240)
Automatic
Disc
Connection
DMR-EZ49VEB_VQT2J51.book 71 ページ ２００９年１２月２１日 月曜日 午後５時４０分
