- 80 -
Advanced (Recording pictures)
[REC] mode:
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Press
1
(
).
Press
3
/
4
to select the ISO sensitivity and then
press [MENU/SET] to set.
•
You can also press
1
[
] to select.
•
You can also press the shutter button halfway to set.
•
The menu screen disappears after about 5 seconds. At this
time, the selected item is automatically set.
¢
When the [ISO LIMIT SET] of [REC] mode menu
(P135)
is set to anything except
[AUTO], it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [AUTO].
•
When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on
brightness within a maximum setting of [ISO400].
•
When setting to [
], ISO sensitivity will adjust automatically depending on brightness
within the maximum setting of [ISO1600]. ([ISO800] when the flash is used)
•
ISO sensitivity will operate as [AUTO] in Motion Picture Recording other than Creative Motion
Picture. Also, [ISO LIMIT SET] will not function.
ISO sensitivity
100
1600
Recording location
(recommended)
When it is light (outdoors)
When it is dark
Shutter speed
Slow
Fast
Noise
Less
Increased
ISO sensitivity
Settings
AUTO
¢
The ISO sensitivity is automatically adjusted according to the
brightness.
¢
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
100/200/400/800/1600
The ISO sensitivity is fixed to various settings.