Others
- 221 -
•
Is the mode dial correctly set?
•
Is there any memory remaining on the built-in memory or the card?
>
Delete the pictures which are not necessary to increase the available memory.
(P64)
•
The picture can become whitish if there is dirt e.g. fingerprints on the lens.
>
If the lens is dirty, turn the camera off, retract the lens barrel
(P10)
and gently wipe the lens
surface with a soft dry cloth.
•
Was this picture taken with the flash at the close range when the zoom is near [W] (1
k
)?
>
Zoom in a little, and then take the pictures.
(P57)
>
Is this a picture taken in [PIN HOLE] in My Color Mode?
>
Check that the exposure is correctly compensated.
(P78)
•
Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker.
>
Set the [MIN. SHTR SPEED]
(P145)
to slower speed.
>
Unset the settings of Multi Film Bracket
(P120)
or White Balance Bracket
(P138)
.
>
Set Auto Bracket
(P79)
or the Burst Mode
(P82)
to [OFF].
•
Is the Self-Timer
(P77)
set to [10S/3PICTURES], or is it set to [FLASH BURST] in Scene Mode
(P101)
?
•
The focus range varies depending on the Recording Mode.
>
Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
(P55)
>
The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures.
(P41)
>
When taking pictures at a slow shutter speed, use the Self-Timer.
(P77)
Recording
The picture cannot be recorded.
The recorded picture is whitish.
The area around where the pictures were taken becomes dark.
The recorded picture is too bright or dark.
2 or 3 pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
